Common Signs Your Hot Water System Needs Repairs

22 February 2023

One of the essential appliances in your home is the water heater, which supplies hot water as needed to all your plumbing fixtures and appliances. It can disrupt your regular schedule if your water heater begins to malfunction or stops functioning completely. If you notice any of the following signs below, get in touch with a reliable plumber in Melbourne to diagnose the issue and fix your hot water system.

Low Water Pressure

If your tap’s water flow is weak, there may be an obstruction in the line or a problem with the pressure regulator. Problems with the pressure regulator are frequently brought on by a leak or a damaged gasket inside the water regulator. You can resolve the pressure issue from the inside by plugging the leak or replacing damaged gaskets.

By lowering the pressure of the hot water, mineral deposits might further harm your water heater. Mineral build-up on the water heater’s surface can obstruct the pipes. As a result, the pressure of the water leaving the boiler is reduced.

Inconsistent Water Temperature

Mineral deposits accumulated around the heater’s water heating components are typically to blame for the inconsistent water temperature in hot water tanks. It might reduce a water heater’s capacity to store hot water if mineral build-up becomes severe enough to occupy space that should be filled with hot water.

If the hot water system is new, it will be simple to remove the deposits. It may not be possible to repair older water heaters or heaters significantly harmed by mineral deposits; replacement is usually the only option in these cases.

Internal Tank Leakage

A water heater tank loses resilience and is unable to bear internal pressure when it splits, corrodes, or leaks from the inside. Lack of water heater maintenance is the main reason for internal tank leakage. As these leaks start tiny but worsen as pressure rises, it is crucial to have your hot water system tested routinely to catch minor flaws before they cause serious harm. If there is an interior leak in the tank, you must replace the water heater.

Rusty Water

A clear indication of a tank or system issue is a brown or orange deposit in your water heater. This deposit is due to rust. You might have a plumbing issue if the water coming out of the cold and hot water taps is rusty. Your water heater is the issue if only the hot water faucet has rust or tiny black particles. This unexpected discomfort can be prevented by routinely having your water heater tested and maintained.

Old Hot Water System

An electric or comparable powered water heater has an eight to ten-year lifespan on average, and a gas heater is six to eight years. With the right maintenance, you might be able to keep your water heater running longer than these estimates. Repairs and maintenance, however, might not be advised if you installed your water heater more than eight years ago, and you should consider replacing it instead. The Durability and longevity also depend on the type of hot water system brands you have in your home.

If you’ve noticed any of these signs, it’s time to give your hot water system a check-up by hot water system experts from FT Plumbing Pty Ltd. We provide reliable hot water system services and other plumbing services in Melbourne. Talk to us now by calling 0418 131 897 for more enquiries.

Optimized by: Netwizard SEO